What kind of speaker setting (5.1 7.1) does a commercial cinema use compared to a typical home theater? - typical 5/1 arm libor floor
And so, like, you can set the same settings in my home theater?
How many players are involved?
Sunday, February 14, 2010
Typical 5/1 Arm Libor Floor What Kind Of Speaker Setting (5.1 7.1) Does A Commercial Cinema Use Compared To A Typical Home Theater?
Subscribe to:
Post Comments (Atom)
4 comments:
7.1 sound in a room is well designed home better than the best of his films available.
Can at home, you need a quiet corner and a mile wide, and as such, the picture is much higher in your favorite chair.
Cinemas use of multiple channels and speakers for one simple reason. You are obliged to inform the surround effect for everyone in the audience, and there is a hell of a lot of people in this audience, in a heck of a lot of lines and a heck of a lot of columns. Above all, to fill this large space is filled with an absorbent material need a damned much power, and at any time, simply begin to distribute more membrane surface to power in space.
You do not need any of This home. In fact, a 10.2-channel seems worse, but the most special in a home theater, and still is for most of them.
If you do not have a separate dedicated building or in an isolated room is incredibly large and expensive, specially built to a theater is a waste of time and money and not make matters worse.
There is no such thing as too much of the good. 7.1 is too much for many rooms in or near the level of the reference volume. Not only the rooms are too small for the plant itself, are often poorly designed for acoustic performance in the first place.
We need to work, 7.1 sounds good. In many cases, 5.1 better in the middle of the room for things that arand found
You can certainly start the idea of just over 7.1. It provides concrete benefits if it is an area that very large and very well designed.
Companies can use a large number of speakers, but in terms of discrete channels of information for teachers, the best audio compression used today, Dolby True HD and DTS.
Now, Dolby TrueHD can support up to 14 discrete channels
and DTS Master Audio can support virtually unlimited number of surround channels.
Like any theater use, of course, everything depends on how many channels are encoded to study on film and the type of equipment they are decoding.
this equipment is the right of the highest quality is now Blu-ray, which then decided that the number of channels 8, the limit to 7.1.
So on the response of the incumbent can now 7.1. There are receivers are channels to increase to 10.2, but also the source of the IRGht is now limited to 7.1, so that further treatment is not.
in a normal movie no speakers 140 watts, up to 7 meters to the wall. In addition, the speakers are not to a receiver connected to a projector reo. So, now its base in the output of a kernel that is shared by many others.
sometimes 16 or more
Post a Comment